Here at IGB Security we aim to offer a unique and tailored approach to your security requirements. Through a select range of manufacturers and equipment we can deliver the latest technology and advise you on the best way to utilise it. From the latest in network cctv to fully intergrated security systems, we can advise, supply, install and commission a system to suit your needs.
Based in Oakley near Basingstoke we cover a large area with CCTV and Access Control installations in Hampshire, Berkshire, Surrey, Sussex, Wiltshire and Dorset. We carry out a site visit to establish what you require the security system to accomplish and then provide you with our recommendations. We can also upgrade, repair and maintain security systems installed by others no matter what condition.
My experience with other suppliers was that we were offered an off the shelf type package that would not totally answer our brief.
Based in Oakley near Basingstoke we cover a large area with CCTV and Access Control installations in Hampshire, Berkshire, Surrey, Sussex, Wiltshire and Dorset. We carry out a site visit to establish what you require the security system to accomplish and then provide you with our recommendations. We can also upgrade, repair and maintain security systems installed by others no matter what condition.
My experience with other suppliers was that we were offered an off the shelf type package that would not totally answer our brief.
Services
Analogue CCTV is traditionally wired in co-ax cable with each camera needing its own power source (240v a/c or low volt source).
Each camera is wired back to a recorder of some kind, almost always a Digital video recorder or DVR.
This type of system often involves installing cables over great distances which can be up to 80% of the installation time.
Network CCTV utilizes the Data cabling (cat5) that exists in most buildings.
In most instances the existing Network will be suitable for the transfer of the CCTV images (subject to the suitability of Network switches and protocols) and enable a rapid deployment of Cameras without the need of additional cabling.
Each camera is wired back to a recorder of some kind, almost always a Digital video recorder or DVR.
This type of system often involves installing cables over great distances which can be up to 80% of the installation time.
Network CCTV utilizes the Data cabling (cat5) that exists in most buildings.
In most instances the existing Network will be suitable for the transfer of the CCTV images (subject to the suitability of Network switches and protocols) and enable a rapid deployment of Cameras without the need of additional cabling.
Net2 is one of the most economical access control systems on the market.
Net2 offers the key requirements of a PC based access control system.
The software gives you full control over the system from your desk.
Any instructions given to the software are immediately updated at all the doors.
Adding users, barring users and changing users' access permissions are all done from the PC quickly and easily.
Net2 offers the key requirements of a PC based access control system.
The software gives you full control over the system from your desk.
Any instructions given to the software are immediately updated at all the doors.
Adding users, barring users and changing users' access permissions are all done from the PC quickly and easily.
Telephone based door entry systems from the tone on your phone.
The system is installer programmed remotely from a standard telephone, mobile or modem link, or locally via the keypad (where fitted) or USB connection.
Each button is programmed to call a different telephone number relating to the destination (flat, office, house etc).
When a visitor presses the required button the optional electronic voice will confirm that the call is being made, a telephone call is then made from the entrance panel to the destination telephone number.
The system is installer programmed remotely from a standard telephone, mobile or modem link, or locally via the keypad (where fitted) or USB connection.
Each button is programmed to call a different telephone number relating to the destination (flat, office, house etc).
When a visitor presses the required button the optional electronic voice will confirm that the call is being made, a telephone call is then made from the entrance panel to the destination telephone number.
Reviews
Be the first to review IGB Security.
Write a Review
