Perimeter Security Ltd are an Oxford based security company with over 12 years experience in the industry. We specialise in scaffolding and construction site security as well as other "difficult to secure" sites such as remote or vacant buildings where mains electricity and telephone lines may not be available. As an NSI acreddited company we also install conventional CCTV and intruder systems to the latest relevant standards.
Our installation, maintenence and response teams now cover most of the UK. Our Site-Guard system is a true 100% wireless alarm system. It uses advanced radio technology to communicate with a range of wireless sensors, sounders and keypads. The system is linked to our alarm receiving centre via the GSM (mobile phone) network where it is monitored 24hrs a day 365 days a year.
The system is set / unset with a remote control key fob or keypad just like your house alarm. In the event of an activation the operators at our alarm receiving centre will immediately contact your key holders and dispatch our response team.
Our installation, maintenence and response teams now cover most of the UK. Our Site-Guard system is a true 100% wireless alarm system. It uses advanced radio technology to communicate with a range of wireless sensors, sounders and keypads. The system is linked to our alarm receiving centre via the GSM (mobile phone) network where it is monitored 24hrs a day 365 days a year.
The system is set / unset with a remote control key fob or keypad just like your house alarm. In the event of an activation the operators at our alarm receiving centre will immediately contact your key holders and dispatch our response team.
Services
Security without limitations.
Until now installing a security system in some locations was either impossible because of the lack of electricity or just too expensive because of the enormous cable runs and ground works required.
The Site-Guard system solves that problem.
We can secure any size of site, remote storage depot or utility using dual band radio and GSM technology.
The Site-Guard system can be installed literally anywhere, no need for mains electricity or a telephone line.
Until now installing a security system in some locations was either impossible because of the lack of electricity or just too expensive because of the enormous cable runs and ground works required.
The Site-Guard system solves that problem.
We can secure any size of site, remote storage depot or utility using dual band radio and GSM technology.
The Site-Guard system can be installed literally anywhere, no need for mains electricity or a telephone line.
Looking for construction site CCTV Hire?
Introducing the Lewis trailer.
A true BS 8418 compliant portable CCTV system.
The Lewis trailer is equipped with 4 fully functional PTZ dome cameras which are controlled automatically by infra-red movement sensors or by our alarm receiving centre.
Once on site the 4 towers are erected.
The trailer its self forms the base of one tower and the other three are securely anchored to the ground individually, usually one on each corner of the site.
The lewis trailer does need mains electricity, at least while the site is open.
Introducing the Lewis trailer.
A true BS 8418 compliant portable CCTV system.
The Lewis trailer is equipped with 4 fully functional PTZ dome cameras which are controlled automatically by infra-red movement sensors or by our alarm receiving centre.
Once on site the 4 towers are erected.
The trailer its self forms the base of one tower and the other three are securely anchored to the ground individually, usually one on each corner of the site.
The lewis trailer does need mains electricity, at least while the site is open.
A superior product!
No False Alarms The detectors that we use have two PIR sensors inside a single unit (both PIR's must activate to cause an alarm condition) We can also configure the system to send confirmation signals to our alarm receiving centre.
This means that the operators will know if more than one alarm sensor has been activated, you may then choose to only action the guarding company after a confirmation signal.
If two detectors, each with two pirs have activated, its NOT a FALSE ALARM!.
No False Alarms The detectors that we use have two PIR sensors inside a single unit (both PIR's must activate to cause an alarm condition) We can also configure the system to send confirmation signals to our alarm receiving centre.
This means that the operators will know if more than one alarm sensor has been activated, you may then choose to only action the guarding company after a confirmation signal.
If two detectors, each with two pirs have activated, its NOT a FALSE ALARM!.
For internal or external use, the Site Guard Alarm can provide a much more cost-effective solution compared to traditional static guarding or mobile patrols.
Our system has been designed to cope with the construction site environment and has a robust build quality, and proven reliability.
The Site-Guard system does not require a connection to mains electricity like most alarm systems do so it can be deployed literally anywhere and the battery lasts for up to 5 years.
In the event of an activation the system triggers a high output external siren with flashing strobe and a signal is sent over the GSM network to our alarm receiving center, where the operators will call your key holders or guarding company.
Our system has been designed to cope with the construction site environment and has a robust build quality, and proven reliability.
The Site-Guard system does not require a connection to mains electricity like most alarm systems do so it can be deployed literally anywhere and the battery lasts for up to 5 years.
In the event of an activation the system triggers a high output external siren with flashing strobe and a signal is sent over the GSM network to our alarm receiving center, where the operators will call your key holders or guarding company.
This presents a problem when it comes to the security of the site because most conventional intruder alarms require a permanent connection to mains electricity.
Our system, the Site-Guard alarm solves this problem.
The Site-Guard is a true 100% wireless intruder alarm, it requires no mains electricity, no telephone line and all sensors, sounders and keypads are wireless.
The system is set/unset with a remote control (key fob) or keypad just like your home alarm system so you will find it very easy to operate.
Our system, the Site-Guard alarm solves this problem.
The Site-Guard is a true 100% wireless intruder alarm, it requires no mains electricity, no telephone line and all sensors, sounders and keypads are wireless.
The system is set/unset with a remote control (key fob) or keypad just like your home alarm system so you will find it very easy to operate.
Reviews
Be the first to review Perimeter Security.
Write a Review